LED Error Type/Cause
Solution (Options or Steps)
Max Util (maximum utilization) LED for the port never blinks (steady light)
❏Port is overloaded.
❏Check the port statistics for the amount of traffic, errors, etc. being transmitted on the port.
Link LED for the port goes off
❏Cable connection is broken.
❏Network station to which the port is connected has been pow- ered off.
❏Wrong type of cable is con- nected between the port and the equipment.
❏Make sure connectors are seated correctly in the equipment at both ends of the cable. Check the continuity of the wires in the cable and the pin assignments on the
❏Make sure the station to which the port is connected is plugged in and powered on.
❏Make sure the correct type of cable is connected to the port (refer to “Connecting to the Net- work” on page
