|
|
| Port LEDs | |
|
| When the IntraSwitch 5308FL is first powered on, the port and | ||
|
| diagnostic LEDs blink. The green power light illuminates and | ||
|
| remains on, indicating electrical power to the unit. | ||
Port LEDs | The IntraSwitch 5308FL has five rows of LEDs. The following | |||
|
| table states their color and meaning: | ||
|
|
| Table | |
|
|
|
|
|
| LED | Color | Meaning |
|
|
|
|
|
|
| 100Mbps | green | 10/100TX port or an installed MII expansion port is | |
|
|
| operating at 100Mbps speed. | |
|
|
| Note: These LEDs only function with ports capable of | |
|
|
| operating at 100Mbps speed (i.e., the 10/100TX port or | |
|
|
| an installed 10/100 MII module). | |
| Max Util | amber | The corresponding port’s receive buffer is full | |
|
|
| (maximum utilization). | |
|
|
| Note: It is normal to see these LEDs light when the | |
|
|
| network is in a state of | |
| FDP/Col | amber | Indicates full duplex mode on the corresponding port. | |
|
|
| Indicates a collision at the switching port for those | |
|
|
| ports operating in half duplex mode. | |
|
|
| Note: Full duplex means that a port can transmit and | |
|
|
| receive at the same time. | |
|
|
| Note: Collision is indicated only on those ports | |
|
|
| operating in half duplex mode. | |
| Data | green | Traffic activity is occurring on the port (transmit [TX] | |
|
|
| or receive [RX]). | |
|
|
| Note: During heavy traffic periods, this LED may be lit | |
|
|
| continuously. | |
| Link | green | A node or other network device is properly connected | |
|
|
| to the corresponding port and is powered on. | |
|
|
|
|
|
Page