| Configure Spanning Tree Parameters |
3 | Select the port number you want to enable |
| or disable Spanning Tree on by typing l on |
the Port Parameter Menu and entering the port number at the prompt.
4
5
ΔNote: The 10/100TX port is port number 9, the MII ports (MII I and MII 2) are port num- bers 10 and 11, respectively.
Press return.
Type e to enable Spanning Tree on the port; type d to disable Spanning Tree on the port.
6 | Type q to exit this menu and return to the |
| Spanning Tree Parameter Menu. |
7 | Type a to apply the changes. |
▲Important! The change will not take effect until Apply is selected from the Span- ning Tree Parameter Menu.
Page