Console Management
Configure SNMP Parameters
This menu controls the IntraSwitch 5308FL’s SNMP (Simple
Network Management Protocol) parameters.
With these parameters, you can configure the IntraSwitch 5308FL’s read and write community strings, set the IntraSwitch 5308FL to generate authentication traps, and determine which management stations on your network can receive traps.
To access the SNMP Parameter Menu, type n from the
Configuration Menu. The following menu appears:
Current Settings
Figure 5-7 SNMP Parameter Menu
Current Settings
Table
Menu.
For information on using the menu, see:
❏“Setting Community Strings” — page
❏“Enabling Trap Authentication” — page
❏“Adding a Trap Receiver” — page
❏“Deleting a Trap Receiver” — page
Page
