
Console Management
Enabling/Disabling Spanning Tree on ALL Ports
To enable or disable Spanning Tree on all ports:
1 | Open the Spanning Tree Parameter Menu by |
| typing s on the Configuration Menu. |
2 | Type d to disable Spanning Tree on all ports; |
| type e to enable Spanning Tree on all ports. |
| To cancel the request, type |
3 | Type a on the Spanning Tree Parameters |
| Menu to apply the configuration. |
The Spanning Tree status is displayed at the top of the menu next to STP Status
Enabling/Disabling Spanning Tree on a Single Port
To enable or disable Spanning Tree on an individual port:
1 | Open the Spanning Tree Parameter Menu by |
| typing s on the Configuration Menu. |
2 | Type c to open the Config STP Port Attributes |
| Menu. |
Figure 5-12 is an example of the Spanning
Tree Port Parameter Menu.
Figure 5-12 Spanning Tree Port Parameters Menu
Page