Asante Technologies 5308F user manual Menu Item Description

Console Management

Table 5-4 Configuration Menu Items
Menu Item	Description
Config System	Displays and allows you to change the
Administration	name, location, and contact information
Information	for the IntraSwitch 5308FL.
	See “Configure System Administration
	Information” on page 5-10.
Config TCP/IP	Displays and allows you to change the
Parameters	information needed to access the
	IntraSwitch 5308FL over the network (via
	in-band management).
	See “Configure TCP/IP Parameters” on
	page 5-12.
Config Bootstrap	Displays and allows you to change the
Parameters	parameters used for downloading a new
	version of software for the IntraSwitch
	5308FL.
	See “Configure BootStrap Parameters”
	on page 5-14.
Config SNMP	Displays and allows you to change the
Parameters	IntraSwitch 5308FL’s SNMP (Simple
	Network Management Protocol)
	parameters; such as, read/write settings,
	trap authentication, and trap receivers.
	See “Configure SNMP Parameters” on
	page 5-18.
Config Port Parameters	Allows you to manually configure each of
	the IntraSwitch 5308FL’s ports for speed,
	connection, link mode, and auto-
	negotiation.
	See “Configure Port Parameters” on
	page 5-22.
Config RMON	Displays and allows you to change the
Parameters	IntraSwitch 5308FL’s RMON parameters.
	See “Configure RMON Parameters” on
	page 5-26.

Page 5-8