![](/images/new-backgrounds/1110597/110597171x1.webp)
Console Management
Configure Spanning Tree Parameters
This menu allows you to view the IntraSwitch 5308FL’s Spanning Tree parameters. It also allows you to enable or disable Spanning Tree on all of the IntraSwitch 5308FL’s ports or on a single port.
By default, the IntraSwitch 5308FL is shipped with Spanning
Tree enabled on all ports.
▲Important! Do not change these parameters unless you have experience and knowledge of the IEEE 802.1d specification.
To access the Spanning Tree Parameter Menu, type s from the
Configuration Menu. The following menu appears:
Current Settings; these values cannot be changed
Figure 5-11 Spanning Tree Parameters Menu
Current Settings
Table
Parameter Menu.
For information on using the menu, see:
❏“Enabling/Disabling Spanning Tree on ALL Ports” — page
❏“Enabling/Disabling Spanning Tree on a Port” — page
Page