| Configure MAC Forwarding Table Parameters |
3 | Press any key on your keyboard to display |
| the next 15 entries. |
4 | Type q to exit the MAC Forwarding Table. |
Finding an Entry in the MAC Forwarding Table
To find an entry in the table:
1 | Open the MAC Forwarding Table Menu by |
| typing f on the Configuration Menu. |
2
3
4
Type f to find an entry.
Enter the MAC address you want to locate at the prompt.
Press return.
If the address is found within the table, it is displayed along with the port number.
If the address is not found, the message “No Such Entry” is displayed.
Setting the Age Out Timer
To set the MAC forwarding table’s age out timer:
1 | Open the MAC Forwarding Table Menu by |
| typing f on the Configuration Menu. |
2
3
4
Type s to set the timer.
Enter the number of seconds you want the addresses to remain in the table.
ΔNote: The default is 300 seconds.
Press return.
The age out timer is set.
Page
