Installation
Connecting
Power
To connect power to the IntraSwitch 5308FL:
1 | Plug one end of the supplied power cord into |
| the power connector on the back of the unit. |
MII 1 | (Port 26) | MII 2 | (Port 27) |
| |||
|
| ||
|
|
|
Redundant Power Supply
Power Cord
Power Switch
Figure 2-5 Connecting the power cord to the IntraSwitch 5308FL
2 | Plug the other end of the power cord into a |
| grounded AC outlet. |
ΔNote: For more information about power and environmental requirements, see Appendix C, “Technical Specifications.”
3 | Turn theIntraSwitch 5308FL’s power switch to |
| the “on” position. |
| Make sure the IntraSwitch 5308FL’s front panel |
| LEDs blink and the POWER LED lights and |
| remains on. |
| ▲ Important! If the power does not come |
| on, refer to Appendix A,“Troubleshooting.” |
4 | Turn the IntraSwitch 5308FL’s power off. |
| The IntraSwitch 5308FL is ready be connected |
to the network. Proceed to “Connecting to the Network” on page
Page
