Asante Technologies 5308F user manual Screw the module into place by tightening

			Installing MII Modules
4	Slide the MII module into the expansion slot
	until it stops, then push the module in until it
	seats with the connector. See Figure 2-3.
	MII 1 (Port 26)	MII 2 (Port 27)

Figure 2-3 Installing an MII expansion module

5	Screw the module into place by tightening the
	thumbscrew on the module’s cover.
	MII 1 (Port 26)	MII 2 (Port 27)

Figure 2-4	Securing an MII expansion module
6	Connect the installed MII expansion module to
	your network, following the cable guidelines
	outlined in “MII Ports” on page 2-10.
	For more information on MII expansion mod-
	ules, refer to the “MII Expansion Modules Instal-
	lation Guide” included with your module.

Page 2-7