Avaya 580, 882 Removing Ports from Hunt Groups

6-28 User Guide for the Avaya P580 and P882 Multiservice Switches, v6.1
Chapter 6
Figure 6-15. Hunt Group Members Web Page
CLI Commands To view details about hunt group members using the CLI, enter the
following command in configuration mode:
(configure)# show huntgroup <huntgroup-name>
To add ports to a hunt group using the CLI, enter the following command
from Configure mode:
(configure)# set port huntgroup {<mod-num> | <mod-swport-
range>} [...,{<mod-num> | <mod-swport-range>}] <huntgroup-name>
Removing Ports from Hunt Groups
You can remove a port from a hunt group by using either the Web Agent or
the CLI.
Web Agent
Procedure To remove a port from a hunt group by using the Web Agent:
1. Open the Switch Port Configuration Web page for th e port th at you want
to remove.
2. Click None in the Hunt Group field.
3. Click Apply.
CLI Command To remove a port from a hunt group, use the following CLI command:
(configure)# clear port huntgroup <mod-swport>