Avaya 580, 882 Configuring Switch Ports

Document No. 10-300077, Issue 2 8-29
Configuring Ports
CAUTION:
Configuring Switch Ports
You can configure how each switch port performs its switching functions
(for example, VLAN parameters, hunt group assignments, trunk mode, and
frame tag scheme) through the switch port parameters.
You can configure switch port parameter s using eith er the Web Agent or the
CLI.
Before changing the VLAN that a port is assigned to, you must
remove the port from the hunt group that the port is assigned to. Do
not attempt to change the VLAN and remove the port from the hunt
group simultaneously. If you attempt to change the VLAN that the
port is assigned to and remove the port from the hunt group
simultaneously, the switch assigns all ports in the hunt group to the
new VLAN.
Web Agent
Procedure To configure switch port parameters using the Web Agent:
1. In the navigation pane, expand the Modules & Ports folder, and then
click Configuration. The Module Information Web pa ge is displayed in
the content pane. See Figure8-2.
2. In the Switch Ports column, select the switch ports for a module. The
Switch Ports Web page is displayed.
3. In the Name column, select a port name. The Switch Port Configuration
Web page is displayed. See Figure8-9.