Avaya 580, 882 Disabling or Enabling Port Redundancy

Document No. 10-300077, Issue 2 8-45
Configuring Ports
Disabling or Enabling Port Redundancy
Web Agent
Procedure You can globally enable or d is abl e port redundancy in the Port Redundancy
Configuration Web page. Disabling redundancy does not delete the pairs.
To enable or disable a port redundancy
1. In the navigation pane, expand the L2 Switching folder, and then click
Port Redundancy. The Port Redundancy Configuration Web page is
displayed in the content pane.
Figure 8-12. Port Redundancy Configuration Web Page
2. In the Configuration field, select one of the following from the pull-
down menu:
■Enable—Enables all existing redundancy pairs.
■Disable—Disables all existing redundancy pairs.
All existing redundancy pairs are enabled or disabled.
CLI Command You can globally enable or disable port redundancy with the CLI. Disabl ing
redundancy pairs does not delete the pairs.
To enable or disable port redundancy, use the following CLI command:
(configure)# set port-redundancy {enable | disable}