Avaya 580, 882 CLI Command

3-4 User Guide for the Avaya P580 and P882 Multiservice Switches, v6.1
Chapter 3
2. Select Simple Network Time Protocol (SNTP) from the Clock Options
box.
The SNTP Client Configuration Web page is displayed in the content
pane. See Figure 3-3.
Figure 3-3. SNTP Client Configuration Web Page
3. Select Enable from the Enable State pull-down menu. The default is
Disable.
4. Enter the server IP address in the Server IP address field for the switch
on which you want to enable SNTP.
5. Click APPLY to save your changes, or CANCEL to clear your selection.
CLI Command To enable SNTP on your switch using the CLI, enter the following
command in Configure mode:
(configure)# sntp server <ip-address>