User Guide for the Avaya P580 and P882 Multiservice Switches, v6.1 12-1
12 Configuring IP Routing
Overview
The Avaya Multiservice Switch supports the full suite of IP protocols for
unicast and multicast packet routing and control. It is compatible with the
installed base of IP routers and does not require changes to software in hosts
or other routers. For Unicast, the Switch supports OSPF, RIP, and RIP2
interior gateway protocols. For M ulticast, it implements IGMP, and
DVMRP.
The following information and procedures provided in this chapter pertain
to layer 3 module configurations only:
■Routing Function
■Requirements for IP Routing
■Routing Configuration Quickstart
■Displaying Existing IP Interfaces
■Creating and Assigning IP Interfaces to the VLAN
■Enabling IP Routing Global Parameters
■IP Multinetting
■Configuring Short-Lived IP Protocol Filters
■Creating IP Static Routes
■Creating a Static Route to a Null Interface
■Creating IP Static ARP Entries
■Creating a BOOTP/DHCP Server Entry
■Configuring Route Redistribution
■IP Multicast
■Monitoring Switch Performance Using IP Statistics
■IP Multicast Statistics