Avaya 580, 882 Enabling Redundant Hardware

10-6 User Guide for the Avaya P580 and P882 Multiservice Switches, v6.1
Chapter 10
Enabling Redundant Hardware
Web Agent
Procedure To enable redundant hardware using the Web Agent:
1. In the navigation pane, expand the System > Configuration folders, and
then click Switch Fabric.
The Switch Fabric Status Web page is displayed in the content pane.
See Figure 10-3.
Figure 10-3. Switch Fabric Status Web Page
2. Select Yes from the Configure redundant Hardware field pull-down
menu.
3. Click APPLY. The Switch Fabric Status should now show the redundant
controller and element Av ail abl e. (Figure 10-4)
4. Save the configuration.
* Note: If you disable and then reenable redundant hardware after the
Primary controller fails, the state of the failed controller
changes from Failed to Avai la ble.