15-6 User Guide for the Avaya P580 and P882 Multiservice Switches, v6.1
Chapter 15
Figure 15-3. ADD OSPF Area Web Page
3. See Table15-2 to configure the Add OSPF Area Web page parameters.
4. Click CREATE to save your changes, or CANCEL to restore previous
settings.
Table 15-2. Add OSPF Area Web Page Parameters
Parameter Allows you to...
Area ID Specify the Area ID (32-bit character) for the new area. This
must be a unique ID within AS.
Note: Do not use 0.0.0.0 as an area ID.
Area Type Select the type of area. Types include:
• Non-Stub - Non-edge device/router.
• Stub - An edge device/router that does not leak external
advertisements.
• Not-so-stubby - This is still a stub area, however, this
device/router can leak some external advertisements.
Translate 7 into
5Enable or Disable the translation of the NSSA ASE Type 7
into an AS External LSA Type 5.
Stub Metric Specify the stub area default summary cost metric. (Default
is 1).
Type 3 AS E
Filter Select to enable or disable the Type 3 summary LSA filter for
Stub and NSSA only.