Document No. 10-300077, Issue 2 12-87
Configuring IP Routing
Figure 12-41. LDAP Configuration Web Page
2. See Table12-34 to configure the LDAP Configuration Web page
parameters.
3. Click APPLY to save your changes, or CANCEL to restore previous
settings.
Table 12-34. LDAP Configuration Web Page Parameters
Parameter Allows You To...
Primary
Server IP
Address
Enter the IP address of your primary LDAP server for the
access control list domain. This address is used first when
connecting to and downloading access lists from an LDAP
server. The default value of 0.0.0.0 indicates to the client that
there is no primary LDAP server.
Primary
Server Port Enter the port number of the primary LDAP server for the
access control list domain. The port number is used in
conjunction with the primary server IP address. There are no
special overload values. The default port is 389.
Secondary
Server IP
Address
Enter the backup LDAP server IP address for the access
control list domain. This address is used as a backup when
connecting to and downloading access lists from an LDAP
server. If the LDAP client is unsuccessful in connecting to or
downloading access lists from the primary server, the
secondary server IP address is used. If the primary server IP
address has a value of 0.0.0.0, the secondary server IP
address is used. The default value is 0.0.0.0.
Note: Setting the IP address of the secondary server to
0.0.0.0 indicates to the LDAP client that there is no
secondary server.
1 of 2