6-22 User Guide for the Avaya P580 and P882 Multiservice Switches, v6.1
Chapter 6
Figure 6-9. Hunt Group Configuration Web Page
2. Click CREATE. The Create Hunt Group Web page is displayed in the
content pane. See Figure 6-10.
Figure 6-10. Create Hunt Group Web Page
3. In the Name field, enter a name for the hunt group. This field accepts a
maximum of 31 alphanumeric characters.
4. In the Load Sharing field, select Enable.
5. In the Auto Flush field, select Enable if you want to enable the auto
flush feature for the ports participating in the hunt group. The default
setting for this field is Disable.
When you enable auto flush for a hunt group, all AFT entries that were
learned on the hunt group are marked invalid if the links to all of the
hunt group ports fail. Once the AFT entries are marked invalid, they c an
be learned on a redundant port. When auto flush is enabled, failover to a
redundant port occurs much sooner.
6. Click APPLY to save your changes, or CANCEL to restore previous
settings.