Avaya 580, 882 Adding or Deleting Interfaces to a Zone Filter

Document No. 10-300077, Issue 2 19-21
Configuring AppleTalk Routing
—CANCEL to restore previous settings.
—Edit If to add or delete this zone fil ter to/from an interface. The
Add/Delete Interface to Zone Filte r Web page is displayed. See
“Adding or Deleting Interfaces to a Z one Filter” later in this
chapter for more information.
CLI Command To edit an AppleTalk zone filter using the CLI, use the fol lo wing c ommand:
(configure)# appletalk access-list <access-list-number> {permit |
deny} zone <string>
Adding or Deleting Interfaces to a Zone Filter
You can add or delete interfaces to a zone filter using either the Web Agent
or the CLI.
Web Agent
Procedure To add or delete interfaces to a zone filter using the Web Agent:
1. In the navigation pane, expand the Routing > AppleTalk >
Configuration folders, and then click Zone Filter.
The AppleTalk Zone Filter Web page is displayed in the content pane.
See Figure 19-16.
2. Select Edit If. The Add/Delete Interface to Zone Filter Web page is
displayed. See Figure 19-18.
Figure 19-18. Add/Delete Interface to Zone Filter Web Page
3. Select the interface to be added from the Add field pull-down menu.
Or
Click the checkbox in the Select column for the interface that you want
to be remove.