Avaya 580, 882 Setting One-Time Summer Time Hours

3-10 User Guide for the Avaya P580 and P882 Multiservice Switches, v6.1
Chapter 3
Setting One-Time Summer Time Hours
You can set one-time summer time hours using either the Web Agent or the
CLI.
Web Agent
Procedure To set Summer Time Hours that are not based on a standard rule using the
Web A ge nt:
1. In the navigation pane, expand the System > Configuration folders, and
then click System Clock.
The System Clock Web page is displayed in the content pane. See
Figure 3-4.
2. In the Clock Options field, click Summer Time Hours Algorithm. The
Summer Time Hours Configuration Web page is displayed in the
content pane. See Figure 3-5.
3. Select Enable from the Enable State pull-down menu. The default is
Disable.
4. Enter the reset value for the clock in minutes in the Offset field. For
example, if you intend to reset the clock forward or backward by one
hour, keep the default value of 60 minutes.
5. Select the check box next to the One-Time field to set the date and time
for Summer Time Hours on a one-time basis:
a. Enter the specific Month, Day, and Year when the Summer Time
Hours start and end.
b. Enter the Hour and Minutes when the Summer Time Hours start
and end.
6. Click APPLY to save your changes, or CANCEL to clear your selection.
See Table 3 -2 for detailed information about the One-Time field parame ters
for the Summer Time Hours Configuration Web page.
Table 3-2. One-Time Summer Time Hours Configuration
Parameter Definition
One-time Select if Summer Time Hours change one time, such as on a
specified date.
When you select one-time Summer Time Hours, you indicate
the time and date on which Summer Time Hours begin and
end.
1 of 2