2-30 User Guide for the Avaya P580 and P882 Multiservice Switches, v6.1
Chapter 2
Web Agent
Procedure To configure the console serial port as a PPP console from the Web Agent:
1. In the navigation pane, expand the System > Configuration folders, and
then click Console.
The Console Configuration Web page is displayed in the content pane.
See Figure 2-14.
2. Select PPP as the console type and click SELECT.
The Console Port Configuration Web page is displayed in the content
pane and displays PPP for the Console Type (Figure 2-17).
* Note: If you select PPP, the PPP Console Port Configuration Web
page is displayed.
Figure 2-17. PPP Console Configuration Web Page
3. Select a baud rate from the Baud Rate field pull-down menu that is
different from the one already selected.
4. Select an option from the Flow Control field pull-down menu. The
options are: None and Xon/Xoff.
*Note: You can only change the baud rate and flow control
parameters after you configure th e serial port as a PPP
console.