25-26 User Guide for the Avaya P580 and P882 Multiservice Switches, v6.1
Chapter 25
Examples: Extended ACL Rules
• Replace the existing DSCP with a
DSCP of 5 for all traffic that has a
source IP address in the 10.10.80
subnet.
• Mask the three least significant bits
of the DSCP
access-list MyAccessList1 6 permit
remark-diffserv 5 mask 10.10.80.0
0.0.0.255
Use the layer 2 priority of the packet
to classify all traffic that has a source
address in the 11.11.11 subnet
access-list MyAccessList1 7 permit
use-l2 11.11.11.0 0.0.0.255
Use the DSCP in the packet to classify
all traffic that has a source IP address
of 199.93.239.168
access-list MyAccessList1 8 permit
use-diffserv host 199.93.239.168
• Use the DSCP in the packet to
classify all traffic that has a source
IP address of 3.3.3.3
• Mask the three least significant bits
of the DSCP
access-list MyAccessList1 9 permit
use-diffserv mask host 3.3.3.3
Assign a priority of 2 to all traffic that
has a source IP address of 1.1.1.1 access-list MyAccessList1 10 permit
use-priority 2 1.1.1.1
Block all traffic that has a source IP
address of 10.1.0.55 access-list MyAccessList1 11 deny
10.1.0.55

Table 25-15. Examples: Standard ACL Rules

To... Enter...

2 of 2

Table 25-16. Examples: Extended ACL Rules

To... Enter...

Use the DSCP in the packet to classify
all traffic that has a:
• Source IP address of 199.93.239.168
• Destination address in the 1.1.1
subnet
access-list MyAcessList2 1 permit
use-diffserv ip host 199.93.239.168
1.1.1.0 0.0.0.255
Use the DSCP in the packet to classify
all traffic that has a:
• Source IP address in the 3.0 subnet
• Destination address in the 5.0 subnet
• Mask the three least significant bits
of the DSCP
access-list MyAccessList2 2 permit
use-diffserv mask ip 3.0.0.0
0.255.255.255 5.0.0.0 0.255.255.255
1 of 3