Avaya 580, 882 Monitoring Your Switch Using IPX

16-16 User Guide for the Avaya P580 and P882 Multiservice Switches, v6.1
Chapter 16
2. Select the checkbox for the IPX Static Service that you want to modify
from the Select column.
3. See Table16-5 to modify the IPX Static Services Web page parameters.
CLI Command To modify an IPX static servic e using the CLI, enter the following
command in Configure mode:
(configure)# ipx service <service-type> <service-name> <network>
<node> <socket> <network.next-hop-node> <hops>
Monitoring Your Switch Using IPX
This section explains how to use IPX to do the following on your switch:
■Displaying IPX Global Statistics
■Searching the IPX Route Table
■Displaying the IPX Route Table
■Displaying IPX Route Table Statistics
■Searching the IPX Service Table
■Displaying the IPX Service Table
■Displaying IPX Service Table Statistics
Displaying IPX Global Statistics
IPX Global Statistics count only the IPX packets that ar e received by or sent
from the Supervisor module, not those packets routed in hardware.
You can display the IPX Global statistics using either th e Web Agent or the
CLI.
Web Agent
Procedure To display the global IPX routing statistics using the Web Agent:
1. In the navigation pane, expand the Routing > IPX > Display folders,
and then click Global Statistics.
The IPX Routing Global Statistics Web pag e is displayed in the content
pane. See Figure 16-12.