19-8 User Guide for the Avaya P580 and P882 Multiservice Switches, v6.1
Chapter 19
3. To add a new zone, enter the new AppleTalk zone name in the Add text
field and click Add. Repeat this step as needed for each new zone on
this interface.
4. To change a zone name(s), place a check mark(s) in the Select column
and make the change(s) to the zone name(s). Click Apply to save the
new AppleTalk zone, or either Delete or Cancel to remove the new
zone.
5. In the navigation pane, expand the Routing > AppleTalk >
Configuration folders, and then click Interfaces.
The AppleTalk Interfaces Web page is redisplayed in the content pane.
See Figure 19-4.
6. Select the new zone that you just created from the Default Zone field
pull-down menu.
7. Make sure there is a check mark next to the interface(s) you will modify.
8. Select the VLAN to be associated with the interface from the VLAN
field pull-down menu.
9. Enter the new port metric to be associated with the interface in the
Metric field.
10. Select the new frame type to be associated with the interface from the
Frame Type pull-down menu.
11. Enter the new network range start number in the Network Range Start
field.
12. Enter the new network range end number in the Network Range End
field.
13. Enter the new network number to be associat ed wit h the inte rf ace i n th e
Network Number field.
14. Enter the new node number to be associated with the interface in the
Node field.
15. Select Enable from the Admin. State field pull-down menu.
16. Select the new default zone associ ated with the interface from the
Default Zone field pull-down menu.
17. Select the AppleTalk interface that you want to update in the Select
column.
18. Click APPLY to save your changes, or CANCEL to restore previous
settings.
*Note: You may select and change multiple interfac es
simultaneously with one APPLY operation.