8-46 User Guide for the Avaya P580 and P882 Multiservice Switches, v6.1
Chapter 8
GBIC Identification
The GBIC Identification feature ide ntifies the type of GBICs that are
installed in 80-series gigabit modules with GBIC interfaces. The feature
identifies the following types of connectors:
■GBIC SX (short wavelength)
■GBIC LX (long wavelength)
■GBIC LX/LH (long wavelength/long haul)
If any nonstandard connectors are present, the feature identifies them as
GBIC LX/LH. You can view this information by us ing the Web Agent, CLI,
or SNMP.

Web Agent

Procedure To use the Web Agent to view the type of GBICs that are connected to the
modules in your switch, open the Physical Port Configuration Web page.
The type of GBIC that is connected to each port is displayed in the
Connector field on this Web page.
To open the Physical Port Configuration Web page:
1. In the navigation pane, expand the Modules & Ports folders, and then
click Configuration.
The Module Information Web page is displayed in the content pane.
2. In the Ports column, click the number for the module that you want to
view GBIC types for.
The Physical Port Configuration Web page is displayed. See
Figure 8-5 for Gigabit modules and Figure8-7 for 10/100 modules.
CLI Command To view the type of GBICs that are connected to the modules in your
switch, use the following CLI com m and:
> show port physical [{<mod-num> | <mod-swport-range>} [...,{<mod-
num> | <mod-swport-range>}]]
The type of GBIC that is connected to each port is displayed in the
Connector field.