Document No. 10-300077, Issue 2 10-15
Configuring Redundancy Options
Synchronization Procedure

Web Agent

Procedure * Note: You must synchronize the active and standby supervisor
modules for the standby (redundant) supervisor to use the same
configuration as the active supervisor. Save the running
configuration to the startup co nfiguration so that if the active
supervisor fails, the current configuration information is not
lost. Synchronizing the two supervisors copies the startup
configuration file to the standby supervisor.
* Note: The P580 and P882 Supervisor modules must be in the same
Fabric mode to synchronize.
To synchronize the active and standby supervisor modules:
1. Copy the running configuration to the startup configuration. For
information on how to copy the running configuration to the startup
configuration, see “Copying Configuration Files” in Chapter2,
“Configuring Redundancy Options.”
2. In the navigation pane, expand the System > Configuration > CPU
Redundancy folders, and then click Status/Statistics.
The CPU Redundancy Status Web page is displ ayed in the cont ent pane.
See Figure 10-7.