Document No. 10-300077, Issue 2 15-21
Configuring the OSPF Routing Prot ocol
Displaying OSPF Links
The OSPF link display provides information on the currently active OSPF
links. You can display the OSPF using either the Web Agent or the CLI.

Web Agent

Procedure To display OSPF links using the Web Agent:
1. In the navigation pane, expand the Routing > IP > OSPF folders, and
then click Links.
The OSPF Links Web page is displayed in the content pane. See
Figure 15-10.
Figure 15-10. OSPF Links Web Page
2. See Tabl e 15-7 for an explanation of the OSPF Links Web page
parameters:
CLI Commands To display OSPF links using the CLI, enter the following command:
■> show ip ospf interface
■> show ip ospf virtual-links
Table 15-7. OSPF Link Parameters
Parameter Displays the...
State State of the OSPF link.
IP Address IP address of the OSPF link.
Area ID Area ID (IP address) associated with the OSPF link.
Type Type of OSPF link.
DR Router ID Router ID of the designated router.
DR Address IP address of the designated router.
BDR Address IP address of the designated border router.