Document No. 10-300077, Issue 2 13-17
Configuring Access Lists
CLI Command To enable ACL logging, use the following CLI command:
(configure)# ip acl-logging enable <access-list-name> <rule-
number>
To disable ACL logging, use the following CLI command:
(configure)# ip acl-logging disable <access-list-name> <rule-
number>
Sample Event Log
Entries Figure 13-5 displays sample ACL matches in the event log.
Figure 13-5. Sample ACL match e s in the event log
Setting a Logging Interval
Web Agent
Procedure To set the interval for ACL logging:
1. In the navigation pane, expand the Routing > IP > Configuration
folders, and then click Access Control.
The IP Access Control Web page is displayed in the content pane. See
Figure 13-4.
2. In the Interval between logging of Access Rule Matches (in seconds)
field, enter the interval at which you want ACL matches logged. Enter
an interval from 1 to 60 seconds.
The default setting is 2 seconds.
3. Click Apply.