Document No. 10-300077, Issue 2 1-3
Introduction
■The Power System
■The M8000R-SUP Supervisor Module
■Media Modules
Avaya P580 Multiservice Switch Chassis
The Avaya P580 Multiservice Switch chassis consists of:
■Seven slots (1 slot for the supervisor module and six payload slots
for media modules)
■Fan Tray
■Up to three power supplies
■A 13x13 crossbar switch fabric
Slots There are seven slots in the P580 chassis. Slot 1 is dedicated for a
supervisor module and the remaining six are payload slots. If a redundant
supervisor is used in the chassis, it must be inserted in slot 2.
Ports The P580 chassis configured with 50-series modules provides support for:
■Up to 120 10/100BASE-TX ports (RJ-45 connector, autosensing)
■Up to 288 10/100BASE-TX ports (Telco connector, autosensing)
■Up to 60 100BASE-FX ports
■Up to 24 gigabit-speed Ethernet ports
The P580 chassis configured with 80-series modules provides support for:
■Up to 144 10/100BASE-TX ports (RJ-45 connector, autosensing)
■Up to 288 10/100BASE-TX ports (Telco connector, autosensing)
■Up to 144 100BASE-FX ports (MT-RJ connector)
■Up to 48 gigabit-speed Ethernet ports
Fan Tray There are two fan assemblies i n the chassis. One fan assembl y is located on
the left side of the chassis to provide air flow to the media modules. This fan
assembly is hot-swappable. The o th er fan assembly is located in the rear of
the chassis to provide air fl ow to the switch fabric. This fa n assembly is not
field replaceable.