Avaya 580, 882 Deleting an AppleTalk Interface

Document No. 10-300077, Issue 2 19-9
Configuring AppleTalk Routing
CLI Command To edit an AppleTalk interface using the CLI, e nte r the following command
from Interface mode:
(config-if:<interface-name>)# appletalk <options>
Deleting an AppleTalk Interface
You can delete an AppleTalk interface using either the Web Agent or the
CLI.
Web Agent
Procedure To delete an AppleTalk interface using the Web Agent:
1. In the navigation pane, expand the Routing > AppleTalk >
Configuration folders, and then click Interfaces.
The AppleTalk Interfaces Web page is displayed in the content pane.
See Figure 19-4.
2. Select the AppleTalk interface that you want to delete from the Select
column.
3. Click DELETE to remove the AppleTalk interface.
CLI Commands U se the following CLI commands i n interface mode to delete an A ppleTalk
interface:
■(config-if:<interface-name>)# no appletalk cable-
range <cable-range>
■(config-if:<interface-name>)# no appletalk address
<network.node>
■(config-if:<interface-name>)# no appletalk zone
<zone-name>
■(config-if:<interface-name>)# no appletalk vlan
<vlan-id>