Avaya 580, 882 Editing an AppleTalk Zone Filter

19-20 User Guide for the Avaya P580 and P882 Multiservice Switches, v6.1
Chapter 19
CLI Command To create an AppleTalk zone filter using th e CLI, use the following
command:
(configure)# appletalk access-list <access-list-number> {permit |
deny} zone <string>
Editing an AppleTalk Zone Filter
You can edit an AppleTalk zone filter using either the Web Agent or the
CLI.
Web Agent
Procedure To edit an AppleTalk zone filter using the Web Agent:
1. In the navigation pane, expand the Routing > AppleTalk >
Configuration folders, and then click Zone Filter.
The AppleTalk Zone Filter Web page is displayed in the content pane.
See Figure 19-17.
2. Click the checkbox in the Select column next to the AppleTalk zone
filter that you want to be edit.
3. See Table19-4 to edit the AppleTalk Zone Filter Web page parameters:.
4. Click:
—CREATE to add a new zone filter. The Add AppleTalk Zone
Filter Web page is displayed. See “Creating an AppleTalk Zone
Filter” earlier in this chapter for more information.
—DELETE to remove the selected zone filter.
Table 19-4. Add AppleTalk Zone Filter Web Page Parameters
Parameter Definition
Access List Enter the access list number to be associated with the zone
filter. Valid values are 632-663.
Name Enter the name of the zone to be filtered. You can also leave
this field blank for wildcardi ng .
Type Select the type of filtering. The options include:
• Deny
• Permit
Interface Select the interface to apply this filter to.