Document No. 10-300077, Issue 2 20-21
Managing Intelligent Multicasting
2. Select Enable from the State field.
3. Click APPLY to complete the operation or CANCEL to ignore the
operation.
CLI Command To enable IGMP Snooping using the CLI, enter the following command
from Configure mode:
(configure)# set igmp-snooping enable
Viewing IGMP Snooping Statistics
You can view IGMP snooping statistics using either the Web Agent or the
CLI.

Web Agent

Procedure To view IGMP snooping statistics using the Web Agent:
1. In the navigation pane, expand the L2 Switching > Intelligent
Multicast folders, and then click IGMP Snooping.
The IGMP Snooping Web page is displayed in the content pane. See
Figure 20-11.
2. See Tabl e 20-8 for an explanation of the IGMP Snooping Web page
parameters:
Table 20-8. IGMP Snooping Web Page Parameters
Parameter Definition
Enable State Select Enable to allow the IGMP snooping on the
interface. The default value is Disable.
Intelligent Multicast
Session Statistics • New Sessions Created - Displays the number
of new sessions created by IGMP snooping.
• Sessions Destroyed - Displays the number of
sessions removed by IGMP snooping.
• New Client Ports Added - Displays the
number of new client ports added by IGMP
snooping.
• New Router Ports Added - Displays the
number of new router ports added by IGMP
snooping.
• Router Ports Removed - Displays the number
of router ports removed by IGMP snooping.