Avaya 580, 882 Deleting a Custom Access Type

2-16 User Guide for the Avaya P580 and P882 Multiservice Switches, v6.1
Chapter 2
CLI Command To modify a custom access type, use the following CLI command:
(configure)# set custom-access-type <catName> [sys-configuration
{ro | rw | none}] [module-port-mgmt {ro | rw | none}] [events-mgmt {ro |
rw | none}] [l2-switching {ro | rw | none}] [routing {ro | rw | none}]
* Note: Unlike the custom-access-type command that you use to create
a custom access type, you must specify read-only, read-write,
or no permission when you use the set custom-access-type
command to modify a custom access type.
Deleting a Custom Access Type
Web Agent
Procedure To delete a custom access type:
1. In the navigation pane, expand the System > Administration folders,
and then click Custom Access Types.
The Custom Access Types Web page is displayed in the content pane.
See Figure 2-5.
2. In the Type Nam e field, select the access type that you want to delete.
3. Click Delete.
The Delete Custom Access Type Web page is displayed in the content
pane. See Figure 2-8.
Figure 2-8. Delete Custom Access Type Web Page
4. Click Yes to delete t he custom access type that is displa yed, or click No
to keep the access type.
*Note: User accounts that are assigned this custom access type
will no longer be able to log into the sw itch.