Chapter 5 Editing Embroidery Data
Microstitch
Displays the position of the stitch whose length is the designated length or less with 
.
Length can be designated from 0.0 to 1.0 mm in units of 0.1 mm, or from 0.00' to 0.04' in units of 0.01'.
1.Select [Microstitch] from the View menu.
2.Designate the length of the stitch to be viewed. Select [View] and designate the length of the microstitch.
3.Click [OK].
Microstitch
Before selecting | After selecting |
Needle Bar and Speed Range
Displays status of the needle bar and speed range.
1.Select the [Needle bar and speed range] from the View menu or click 
.
Indicates the needle | Indicates the stitching | Pause is set when the | Indicates the range of |
number and the color. | order and the color. | range shows S marking. | each needle bar. |
Change of display color
When the color of the embroidering sequence is changed, the color displayed on the screen is changed. When ending embroidering or reading other data, the confirmation screen for saving the setting appears.
101 |
