Chapter 5 Editing Embroidery Data
The number for repetition is 1 to 100 for both vertical (Row) and horizontal (Column) directions.
The unit for repetition can be set in inches. To use the inch unit, set the length to [inch] on the [Configuration] of Tool menu of the machine controller. (
page 148) 
The pattern connection can be set in "Direction" as follows:
From top left,alternating directions | From top left,left to right direction |
From bottom left,alternating directions | From bottom left,left to right direction |
1.Select [Repeat] from Edit menu or click 
.
2.Specify the number, interval and direction of repetition.
Repeat count in the longitudinal direction
Repeat count in the lateral direction
The value can be directly entered.
Click here to increase/decrease the value.
Select the direction of repetition.
Select the reference position for spacing.
All patterns created in repetition are grouped as a single pattern.
Longitudinal distance (Unit: 0.1 mm or 0.01')
Lateral distance (Unit: 0.1 mm or 0.01')
3.Click [OK].
110 |
