
Chapter 2 Preparation of Embroidery Machine
•If tubular round arms are not in a horizontal position:
Follow these steps for adjustment:
| If the tubular round arms cannot be set in a |
q | horizontal position (inclined) because of |
w | the weight of fabrics, make an adjustment |
| |
r | using roller spacers in the following steps. |
| (Four roller spacers are inserted before |
| shipment.) |
| 1. Loosen bolts w of X roller base q and |
| remove roller spacers e. |
| 2. Insert a proper number of roller spacers e |
| between X roller base q and |
e | N r. Tighten bolts w. |
| Note) When tightening bolts w, press X roller base |
| q against |
| backlash in between. |
| 3. For the other roller spacers, follow the |
| above steps. |
| Note) Use the same number of roller spacers in ev- |
| ery position. |
50 |