Lucent Technologies Comcode 108678723 Gain/Loss adjustments, None , lan , man , wan , and custom

DEFINITY ECS Release 8.2 ATM Installation,	Issue 1
Upgrades, and Administration 555-233-124	April 2000

5Administering ATM-PNC and ATM-CES

Administering DEFINITY ECS			5-31
Field description:
Algorithm	The name of the cache algorithm (default is lan). Possible values are
	none, lan, man, wan, and custom.
	When this field is changed to none, lan, man, or wan, the read-only For
	Latency and Hold Time field values change to the following (all other
	entries are blank):
	Value	For Latency (ms)	Hold Time (ms)
	none	0	0
	lan	50	36
		0	12
	man	800	80
		50	16
		0	8
	wan	800	200
		200	36
		50	16
		0	0
	When this field is custom, none of the For Latency or Hold Time field
	values change, but the fields change from read-only to read/write. For
	example, if you want a slight variation of the wan algorithm, type wan first
	to set the above values, then type custom to change the individual
	parameters.
Size	The maximum number of entries simultaneously allowed in the cache
	(default = 410).
For Latency	These fields (10) are read-only if the Algorithm field is none, lan, man,
	or wan, but are read/write if Algorithm is custom. Defaults: 36 for the
	1st entry, 0 for the second, blank for the last 8 entries.

Gain/Loss adjustments

Gain and loss are administrable. Calls between a digital (BRI or DCP) phone (6400 and 8400 series) and an analog trunk port require adjustments to the default gain/loss settings to prevent distortion. Use the procedure (Table 5-12) to administer digital phones on ATM-PNC DEFINITY ECSs.

NOTE:

Use the following procedure only for Series 6400 or 8400 digital phones.