Lucent Technologies Comcode 108678723 manual Appendix a

Table 4-4. Upgrading DEFINITY ECS CSS without ATM to Release 8r ATM-PNC — Standard and High Reliability —

						Record	More	Site-specific
÷	Step	Action	Command	Description	Time	data	info	comments
	22.	Administer port	add atm pnc n	Administer the following fields for		Y	Refer to
		network connectivity	(number or next)	A-PNC:			Appendix A,
				Name: ATM switch port information.			‘‘Baselining
							the
				ESI: MAC address from ATM switches
							Customer’s
				E.164, HO-DSP, and SEL from ATM
							Configuration’’
				switches (refer to worksheets).

				NOTE:
				The administered address of
				ATM ports and the ATM circuit
				packs in PN cabinets must
				match.
23.	Check	list sys-link	Ensure that PACLs (all PNs) and EALs		Screen 4-8
	administration		(all EPNs) are up.
24.	Check health	status pnc	Is State of Health field functional?		Screen 4-2
			Any alarms?
25.	If critical reliability,		If critical reliability, return to step 21 in
	return to previous		Table 4-3
	procedure
26.	Save translations	save translation	Copy upgraded translations to the
			system disk, which takes about 2
			minutes
27.	Administer	change	Remove all DS1 timing references.		Screen 4-5
	synchronization	synchronization
	source				‘‘Installing and
					testing the
					splitter’’ on
					page 3-19
28.	Save translations	save translations	Save this portion of the upgrade to the
		removable-media	fall-back removable media.
29.	Log off DEFINITY	logoff	Log off before powering down

4 Upgrading to ATM-PNC CSS to R8r ATM-PNC DEFINITY ECS Release 8.2 ATM Installation, Upgrades, and Administration 555-233-124

4-11 Issue 1 April 2000