Lucent Technologies Comcode 108678723 manual ATM Port Network Connectivity ATM-PNC

DEFINITY ECS Release 8.2 ATM Installation,	Issue 1
Upgrades, and Administration 555-233-124	April 2000

5Administering ATM-PNC and ATM-CES

Administering DEFINITY ECS 5-5

ATM Port Network Connectivity (ATM-PNC)

Each DEFINITY port network must be translated in the PPN’s screen with the full ATM address (The ATM switch prefix, plus the port network’s ESI, plus a Selector of 0) that uniquely identifies it.

Use the procedure in Table 5-4 to administer ATM-PNC:

Table 5-4. ATM-PNC administration

√	Step	Action	Command	Description
	1.	Log on DEFINITY		Use the init login to log on to the DEFINITY switch.
		ECS switch			NOTE:
					An init login is required to change customer
					options and will be challenged by Access
					Security Gateway (ASG). Contact your
					regional CSA (customer software
					administrator) to perform this function.
	2.	Turn on	change	The Customer Options screen (Screen 5-2) displays.
		ATM-PNC	system-parameters
			customer-options
	3.	Set the mode to		Set Async.Transfer Mode (ATM) PNC? field to
		yes		y.
	4.	If duplicated		Set the PNC Duplication? field to y
		PNC (critical
		reliability), set
		PNC duplication
	5.	Log off the		Log off the DEFINITY system administration terminal.
		DEFINITY ECS
	6.	Log onto the		Use the craft login to log on to the DEFINITY switch
		DEFINITY ECS		(ignore any alarms at this time).
					NOTE:
					The init login is no longer required.
	7.	Administer ATM		Use the ATM worksheet in Appendix A, ‘‘Baselining
		PNC		the Customer’s Configuration’’ to record the
				configuration.
	8.	Add new PNC	add pnc next	Add the next PNC.
	9.	Set location		Set the Location: field to the address of the ATM
		address		circuit pack (in 01C01 - cabinet, carrier, slot format).
	10.	Assign network		Type a name in the Name: field to assign a unique,
		name		15-character port network name.