Lucent Technologies Comcode 108678723 manual Screen 5-6. Signaling group, Channel

DEFINITY ECS Release 8.2 ATM Installation,	Issue 1
Upgrades, and Administration 555-233-124	April 2000

5Administering ATM-PNC and ATM-CES

Administering DEFINITY ECS				5-19
add signaling-group			Page	1 of 6
	SIGNALING	GROUP
Group Number: 2	Group Type: atm		Name:
			Max number of NCA	TSC: 0
	D-Channel:		Max number of CA	TSC: 0
			Trunk Group for NCA	TSC:
Trunk Group for Channel Selection:
Supplementary Service Protocol: a

CIRCUIT PARAMETERS

Virtual Path Identifier: 0

Virtual Channel Identifier:

Signaling	Mode:	isdn-pri	Circuit Type:	T1
Idle	Code:	11111111	Connect:	pbx

Interface Companding: mulaw

Country Protocol: 1

Protocol Version: a

DCP/Analog Bearer Capability: 3.1kHz

Interworking Message: PROGress

Screen 5-6. Signaling group

Table 5-9. Country and protocol version supported (for Screen 5-6)

Value	Country	Protocol supported
1-a	United States, Canada	AT&T TR41449/41459 (tested with AT&T,
		Canadian, and MCI networks)
1-b	United States	Bellcore TR 1268; NIUF.302; ANSI T1.607
2	Australia	AUSTEL TSO14.1; Telecom Australia TPH 1856
3	Japan	NTT INIS-NET
4	Italy	ETS 300 102
5	Netherlands	ETS 300 102
6	Singapore	ETS 300 102
7	Mexico	ETS 300 102
8	Belgium	ETS 300 102
9	Saudi Arabia	ETS 300 102
10-a	United Kingdom	ETS 300 102 (for connection to DASS II/DPNSS
		through external converter)
10-b	United Kingdom	ETS 300 102 (Mercury) British Telecom ISDN 30
11	Spain	Telefonica ISDN Specification
12-a	France	VN4 (French National PRI)