Lucent Technologies Comcode 108678723 manual Ensure that the Timezone Offset field for

DEFINITY ECS Release 8.2 ATM Installation,	Issue 1
Upgrades, and Administration 555-233-124	April 2000

5Administering ATM-PNC and ATM-CES

	Administering DEFINITY ECS		5-24
Table 5-11. Administer location procedure —
√	Step	Action	Description
	5.	Administer cabinet	Each cabinet in the switch and the port network(s) in that
		location	cabinet must be assigned a location number (default
			location number is 1).
			Change the Location field to the appropriate number
			and press Enter.
	6.	Administer location	Type change locations and press Enter.
		properties	The Locations screen displays (Screen 5-12).
	7.	Set timezone offset	Ensure that the Timezone Offset field for
			Location 1 is set at 00:00, indicating the local time. This
			serves as a system-wide, relative time reference.
	8.	Set Number Plan Area	The Number Plan Area Code field (for subnet trunking
		Code	conversions between 10-digit North American Number
			Plan (NANP) and 7-digit (local) numbers.
			Leaving the field blank is the normal setting for a location
			■ outside the NANP.
			■ with no 7-digit local calling plan. These locations may
			have overlayed area codes requiring10-digit dialing.
	9.	Administer cabinet	Administer all other locations as necessary.
		locations	For example, if the PPN is in New York and a group of

EPNs is in Los Angeles, then New York (location 1) is the reference and is administered with no time offset (see step 8). Los Angeles (location 2) is 3 hours earlier than New York time and is administered with a time offset of -03:00.

Administer cabinet locations as they are added to the system. More than 1 cabinet can be in the same location.

For location-related feature limitations and interactions see

Table 5-11.

When finished, press Enter to effect the changes.