Lucent Technologies Comcode 108678723 manual Record More

Table 4-6. Upgrading ATM-PNC from Release 6.3r to Release 8r — Standard and High Reliability —

					Record	More
÷	Step	Action	Command	Description	Time data	info	Site-specific comments
	10.	Remove old ATM		Remove old, A-PNC TN2238 circuit
		circuit packs		packs.

				NOTE:
				Carefully remove the fiber
				connections to the ATM circuit
				packs.
11.	Insert ATM circuit		Insert A-PNC TN2305/TN2306 circuit
	packs		packs.
12.	Connect fiber to		Physically connect (reterminate) fiber to
	A-PNC ATM circuit		all A-PNC ATM circuit packs
	packs
13.	Administer A-PNC	change	Administer A-PNC ATM circuit pack		Y
	ATM circuit packs	circuit-packs n
		(cabinet number)
14.	Administer ILMI/ESI	change atm pnc n	Change the new ESI (board) address in		Y	Screen
	information	(connection	the ESI field for each B-PNC ATM			4-4
		number)	circuit pack.
			Query the ATM switch. Read the
			address information from the ATM
			terminal screen and duplicate in the
			DEFINITY ECS switch administration.
15.	Verify circuit pack	list configuration	Ensure that all new A-PNC ATM circuit
	insertion	atm	packs are listed in the report.
16.	Release atm	release atm pnc n	Release all of the atm connections that
	connection		were busied out in step 10.

4 Upgrading to ATM-PNC R7r ATM-PNC to R8r ATM-PNC DEFINITY ECS Release 8.2 ATM Installation, Upgrades, and Administration 555-233-124

4-19 Issue 1 April 2000