Lucent Technologies Comcode 108678723 manual Screen 5-12. Locations-screen, Field description

DEFINITY ECS Release 8.2 ATM Installation,	Issue 1
Upgrades, and Administration 555-233-124	April 2000

5Administering ATM-PNC and ATM-CES

Administering DEFINITY ECS		5-27
	Field description:
Location	Location number associated with the cabinet (range is 1-44, default 1).

■Field cannot be blank

■Location is display-only if the Multiple locations field (change system-parameterscustomer-options) is not set to y.

change locations				Page 1 of 3
		LOCATIONS
		ARS Prefix 1 Required	For 10-Digit NAMP Calls? y
Number	Name	Timezeone	Daylight-Savings	Number Plan
		Offset	Rule	Area Code
1	Main	+ 00:00	0
2		:
3		:
4		:
5		:
6		:
7		:
8		:
9		:
10		:
11		:
12		:
13		:
14		:

Screen 5-12. Locations—screen 1

NOTE:

Upgrades from a previous software version default to a single location (location 1) with the values shown in Screen 5-12. The Number Plan Area Code is the home NPA from the dial plan screen of the earlier release.

Field description:

ARS Prefix 1	This field is set to y if all 10-digit NANP calls (those marked as FNPA in the
Required For	ARS analysis tables) must be preceded by a digit ‘1’ (commonly called the
10-Digit NANP	toll prefix); otherwise, it is set to n.
Calls?
		NOTE:
		Many areas in the United States have changed to 10-digit dialing for
		local calls, and administration for this field and the ARS analysis
		entries must reflect these changes.
Number	This read-only field uniquely identifies a location. Valid values range from
	1 to 44.