Lucent Technologies Comcode 108678723 manual Trunk group can contain either Isdn or ATM

DEFINITY ECS Release 8.2 ATM Installation,	Issue 1
Upgrades, and Administration 555-233-124	April 2000

5Administering ATM-PNC and ATM-CES

	Administering DEFINITY ECS			5-16
Table 5-8. ATM-CES administration —
√	Step	Action	Description
	30.	Set final fields	Set the following fields (tabbing goes horizontally):
			■	Group Type: field to isdn.
				NOTE:
				A trunk group can contain either ISDN or ATM
				trunks, but not both.
			■	The CDR Reports field defaults to y.
			■	The Carrier Medium: field to ATM.
			■ The TAC: field to match customer’s dial plan.
			■	The Dial Access? field defaults to n.
			■	The Service Type: field to tie.
			Go to screen 6 and add the channel-to-port mapping

(Screen 5-10). You must have the same number of entries as port numbers in step 28.

Press Enter to save the changes.

31. Save translations Type save translation and press Enter.