Lucent Technologies Comcode 108678723 manual SVC latency commands

DEFINITY ECS Release 8.2 ATM Installation,	Issue 1
Upgrades, and Administration 555-233-124	April 2000
6 Troubleshooting
Troubleshooting ATM-PNC	6-46

SVC latency commands

Two reports are available to help monitor the ATM network:

1.The ATM PNC Latency Histogram report (accessed through the list measurements atm latency-histogramcommand) shows:

■Setup count

■AddParty count

■total

■average latencies

■histogram (21 different time bins ranging from 0-9 msec. to +10 sec.)

Syntax: list measurements atm latency-histogram current-hourlast-hourtoday-totalyesterday-total[print or schedule]

The list measurements atm latency-histogram output is shown in Screen 6-18.

list measurements atm latency-histogram				last-hour
						Page 1	SPE A
Switch Name:				Date: 10:27 am TUE OCT 25, 1999
		ATM PNC LATENCY HISTOGRAM
Setup Count:	770	Average Latency (msec): 53				Failure Count: 3
AddParty Count:	538	Average Latency (msec): 92				Failure Count: 1
Total Count: 1308		Average Latency (msec): 71				Failure Count: 4
Range (msec) Setup AddParty Total				Range (sec) Setup AddParty Total
0-9	0	0	0	1-1.9	1	0	1
10-19	200	2	202	2-2.9	0	0	0
20-49	400	3	403	3-3.9	0	0	0
50-99	100	1	101	4-4.9	6	1	7
100-149	50	6	56	5-5.9	0	0	0
150-199	10	0	10	6-6.9	0	0	0
200-249	3	0	3	7-7.9	0	0	0
250-299	0	0	0	8-8.9	0	0	0
300-399	0	0	0	9-9.9	0	0	0
400-499	0	0	0	10 +	0	0	0
500-999	0	0	0

Screen 6-18. ATM-PNC latency histogram report