Lucent Technologies Comcode 108678723 manual Network duplication administration

DEFINITY ECS Release 8.2 ATM Installation,	Issue 1
Upgrades, and Administration 555-233-124	April 2000

3Installing a DEFINITY ECS ATM-PNC

ATM Network Duplication 3-35

Network duplication administration

The procedure to administer ATM network duplication (Table 3-17) assumes that customers with:

■High reliability (duplex SPE complexes) and who desire greater reliability would migrate to critical reliability configurations

■Critical reliability configurations would not migrate to ATM network duplication

NOTE:

The screens follow the table and reflect what displays on an R8r platform using a SAT. Your screen interface and page numbers may differ.

Table 3-17. Network duplication administration procedure

√	Step	Action	Command	Description
	1.	Turn feature on	change	Change the PNC Duplication? field on the
			system-parameters	customer options screen to y (Screen 3-3). This
			customer-options	requires a Lucent Services login.
	2.	Add hardware		■ Insert a second TN2305/TN2306 ATM
				Interface circuit pack in slot in the
				B-position port carrier in each EPN or
				D-position carrier in EPNs configured for 2
				port networks.
				■ Add a TN2182 tone-clock circuit pack in the
				slot labeled Tone-Clock.
				— For a standard reliability system, add it
				to the A-position carreir and either the
				B- or D-postion carrier in EPNs
				configured for 2 port networks.
				— For a duplicated system, add it to the
				A-, B-, D- and E-position carriers in
				EPNs configured for 2 port networks.
	3.	Add ATM B-PNC	change atm-pnc	Bring up the ATM PNC screen (number is the
		address	number	connection number assigned to each PNC
				being administered).
				Add in the B-PNC ATM address information in
				the right-hand column of the screen (Screen
				3-4).
	4.	Enable	change	Change the Enable Operation of PNC
		duplication	system-parameters	Duplication? field on the Duplication-Related
			duplication	System Parameters screen to y (Screen 3-5).

NOTE:

The Enable Operation of Spe

Duplication? field must remain n.