Lucent Technologies Comcode 108678723 manual Information Connection ESI field for each B-PNC ATM

Table 4-5. Upgrading ATM-PNC from Release 6.3r to Release 8r — Critical reliability/ATM network duplication —

						Record	More	Site-specific
÷	Step	Action	Command	Description	Time	data	info	comments
	10.	Busyout connection	busyout atm pnc	Busyout all connections listed in step 8,
			b-pnc n	beginning with B-PNC EPNs.
			(connection
			number)
	11.	Remove old ATM		Remove old, B-PNC TN2238 circuit
		circuit packs		packs.

				NOTE:
				First, carefully remove the fiber
				connections to the ATM circuit
				packs.
12.	Insert ATM circuit		Insert B-PNC TN2305/TN2306 circuit
	packs		packs.
13.	Connect fiber to		Physically connect (reterminate) fiber to
	B-PNC ATM circuit		all B-PNC ATM circuit packs
	packs
14.	Administer ILMI/ESI	change atm pnc n	Change the new ESI (board) address in		Y	Screen 4-2
	information	(connection	the ESI field for each B-PNC ATM			Appendix A,
		number)	circuit pack.
						‘‘Baselining
			Query the ATM switch. Read the
						the
			address information from the terminal
						Customer’s
			screen and duplicate in the DEFINITY
						Configuration’’
			ECS switch administration or on the
			worksheet.
15.	Verify circuit pack	list configuration	Ensure that all new B-PNC ATM circuit
	insertion	atm	packs are listed in the report.
16.	Release atm	release atm pnc	Release all of the atm connections that
	connection	b-pnc n	were busied out in step 9.
17.	Release the standby	release	Release the standby PNC before
	PNC	pnc-standby	making any physical connections.
18.	Check link	list sys-link	Ensure that the PACLs (all PNs) and			Screen 4-8
	administration		EALs (all EPNs) are up.

4 Upgrading to ATM-PNC R7r ATM-PNC to R8r ATM-PNC DEFINITY ECS Release 8.2 ATM Installation, Upgrades, and Administration 555-233-124

4-16 Issue 1 April 2000