Lucent Technologies Comcode 108678723 manual Cross-product Compatibility, Conversant

DEFINITY ECS Release 8.2 ATM Installation,	Issue 1
Upgrades, and Administration 555-233-124	April 2000

BATM Switch Feature Interactions

Cross-product Compatibility B-24

Table B-6. Release 7 or later ATM feature interactions —

	Affected by
	Race
Feature	Location Condition Description	Remedy

Time-of-Day	X	The system clock, which
Routing		determines time-of-day routing
		transitions, permits administration
		of a daylight savings time rule, if
		desired.

System clock (if administered), changes automatically according to the specified rule, and time-of-day changes follow the system clock.

Uniform Dial Plan	X		Uniform Dial Plan in a
			network of switches
			makes it easier to merge
			those switches into a
			single WAN PNC switch.
Voice Terminal	X	Some phones maintain an internal	Base correct date and
Display - Date/Time		time that is not synchronized with	time display on the user’s
Display		the switch, and must be set by the	location if location is
		user.	administered.
World Class	X	Location-dependent digit analysis
Routing		and conversion for ARS
(Multinational Call
Routing/AAR-ARS)

1.If a customer does not use AAR/ARS partitioning (or time-of-day routing), then the partition-routing table is not used at all, and route patterns are administered directly in AAR/ARS analysis entries.

Cross-product Compatibility

Observe the following cross-product compatibility issues:

Table B-7. Cross-product compatibility with DEFINITY ATM

Lucent Product	Description
AUDIX	For the caller to hear the complete AUDIX greeting message, the
	connection between the caller and AUDIX must be available
	immediately after AUDIX answers a call.
Conversant	Similar to the considerations for AUDIX, there must be an available talk
	path between the caller and the Conversant so that the caller hears
	prompts from the Conversant.