Lucent Technologies Comcode 108678723 manual Final Checklist and Test

DEFINITY ECS Release 8.2 ATM Installation,	Issue 1
Upgrades, and Administration 555-233-124	April 2000

5Administering ATM-PNC and ATM-CES

Final Checklist and Test 5-34

Final Checklist and Test

After you complete all the administration, you might want to run through a final checklist and verify that everything is working. This section contains a final installation checklist and a procedure for testing the installation.

Use Table 5-13 to make sure that the switch administration for both the ATM and

DEFINITY ECS switches is complete. Use Table 5-14 and Table 5-15 to test the

ATM-PNC and ATM-CES installations, respectively.

Table 5-13. Final installation checklist

√	Switch
	administration	What to check		How to check
	ATM	1. A VPI or VCI is administered for each CES PVC		Query ATM switch
		2. Class of service is Constant Bit Rate (CBR)		Query ATM switch
		3. Quality of Service (QoS) is Peak Cell Rate		Query ATM switch
		(PCR)
	DEFINITY ECS	1. ATM circuit packs inserted and translated		Query DEFINITY ECS (list
	switch			configuration atm)
		2. Signaling group	a. Signaling group	Query DEFINITY ECS (status
		for each PVC	identifier	signaling group)
			b. Circuit pack ID
			c. VPI/VCI
			d. VC type is PVC
			e. D-channel port
			number
			assigned
			properly
			f. Signaling type
			(CES)
			administered
			g. Minimum
			number of
			channels
			administered
			(total of 7, at
			least 1 must be a
			D channel)
			h. D- and
			B-channel-to-por
			t mapping
		3. PVCs are up		Query DEFINITY ECS (status
				signaling-group n). If
				signaling group is in service,
				then PVCs are up.
	ATM-PNC	1. ATM circuit packs installed and translated		Query DEFINITY ECS